1: In which of the following modes in Cisco's IOS can you issue show commands? (Choose two.)
A. User
B. Privileged
C. Line Configuration
D. Global Configuration
 
2: You are the network administrator for a large corporation. You want to be able to store all your configurations in a centralized location. Which of these servers will allow you to do so? (Choose two.)
A. FTP
B. TFTP
C. SQL
D. Oracle
 
3: You need to troubleshoot your network IP connectivity. Which of the following commands would you use to find the IP address on your Ethernet 0 interface?
A. ping
B. IPConfig
C. traceroute
D. Show interface Ethernet 0
 
4: Which command would you use at the CLI in User mode to enter Privileged EXEC mode?
A. Privilege
B. Admin
C. Enable
D. Disable
 
5: You have just received 14 Catalyst switches for your network. You would like to install these switches into your production network to provide separate collision domains for each of the connected devices. What configuration is required to provide this functionality?
A. No configuration is required.
B. You must set up an IP address on the switch.
C. You must configure unique VLANs on the switches.
D. You must install the Cisco IOS.6: Which of the following prompts indicates your router is in Privileged EXEC mode?
A. Router>
B. Router#
C. Router&
D. Router$
 
7: You have made a console connection to your Cisco Catalyst switch and you see the > symbol in HyperTerminal. What does it mean?
A. You are in Privileged EXEC mode.
B. You are in User EXEC mode.
C. The switch has not been configured.
D. The switch is in need of repairs.
 
8: You would like to assign a meaningful name to your Catalyst switch. What command should you use?
A. enable
B. host name
C. hostname
D. name
 
9: You need to assign an IP address to your Catalyst 2950 switch. You are at the HQ_SW1> prompt. What is the correct series of commands? (cr = carriage return)
A. enable ip address 10.1.1.1
B. enable ip address 10.1.1.1 255.255.255.0
C. enable configure terminal ip address 10.1.1.1 255.255.255.0
D. enable configure terminal interface vlan 1 ip address 10.1.1.1 255.255.255.0
 
10: Which of the following commands displays the syntax for the clock command?
A. cl?
B. clock?
C. clock ?
D. cl ?
11: Which of the following commands allows you to configure a welcoming message whenever you log in to a router?
A. Router(config)# banner message
B. Router(config)# banner motd &
C. Router# banner motd #
D. Router# banner message !
12: You need to connect to your 2621XM router to configure an interface. Which of the following methods allows you to connect to and issue commands on the router? (Choose three.)
A. Telnet
B. FTP
C. Console connection
D. AUX connection
 
13: You want to prevent unauthorized users from plugging their laptops into the router. What type of password helps prevent this issue?
A. vty
B. Interface
C. Console
D. Enable
 
14: You have connected to the console port and are running HyperTerminal. You see only scrambled characters and symbols. What is the most likely solution to this problem?
A. Change the connectors.
B. Use a different Terminal program.
C. Reset the router.

[1] [2] [3] [4] [5] 下一页

思科认证：CCNA真题(2)基本IOS配置
小雪客服/小艳客服(30分钟 内回答问题)
QQ咨询：:569921419 代写文章：:点击留言 (上午8:30-晚上22:00)